Cases & News

PCD, CBN and carbide tool grinding

The challenge During production of PCD and CBN tools heat is a challenge to avoid, or at least to minimize. Van Frankenhuyzen in Lexmond (The Netherlands) is a world leading producer of these PCD and CBN mills. The challenge given to us by…
Residual Stress Measurement

Quality Controlled Shot-Peening for HSLA materials

Shot-Peening is used to generate surface-near compressive residual stresses in final shape parts, usually to improve their fatigue properties. The success of the process can be checked in different ways. XRD and Hole-Drilling determine…

Root cause analysis

Root cause analysis results in stable and safer process at lower cost The challenge When our client (a parts manufacturer for food processing machinery) switched from stainless steel 416 to 17-4PH of 45Hrc in their profile surface grinding…
Coolant nozzle

Cooling additives in grinding

Barkhausen Noise Analysis – benchmark analysis of coolant additives in the grinding process  The challenge Our customer wanted to know whether it was possible to optimize a coolant fluid in a grinding process using Barkhausen Noise Analysis.…

KLM Maintenance & Engeneering

Detection of thermal damage on vital parts for the aerospace industry The challenge High Strength Low Alloy (HSLA) steel is widely used in the aerospace industry for the manufacture of vital parts. Hard-to-detect thermal damage to such parts…
worn out dressing tool

Top 5 root causes of grinding burn

Grinding burn or thermal damage is a common cause of machine or engine component failure. When grinding heat is not quickly detected and removed by a suitable cooling solution, it can have a big impact on the service life of the product. In…
Barkhausen noise analysis

Barkhausen analysis acceptance criteria (rejection limits)

Helping customers out setting Barkhausen acceptance criteria is one of the competences we provide. Download the complete guidelines for creating reference parts for Barkhausen Noise Analysis for Rollscan systems.
Grinding burn training

Grinding training at KLM Engineering & Maintenance

Innogrind has again provided a Barkhausen training at KLM Royal Dutch Airlines recently. A case study that was done together with Innogrind in the past revealed that Barkhausen Noise Analysis is the only NDT method to discover grinding burn under a chrome layer. The question has been asked to upgrade quality engineers skills in this NDT technique.
Grinding burn detection

How does a coolant nozzle work?

To prevent grinding burn or thermal damage, production processes need the right coolant flow rate to achieve adequate cooling. Among other demands, this requires coolant nozzles with optimum geometry and exceptional durability. The use of 3D printing gives us complete freedom to design custom coolant nozzles. Check out the video how it works!

Online kennis vergroten

Medewerkers van PM vergroten hun kennis en expertise op het gebied van Slijpen met deze online cursus. De cursus is specifiek afgestemd op de wensen van PM. Innogrind and STODT bring education in grinding online. Last week we started at…

Uitnodiging Slijpacademie

STODT en Innogrind nodigen u uit voor een interactief en informerende slijpbijeenkomst om zo gezamenlijke kennis te deling en het vakmanschap te vergroten in de slijpindustrie. Tijdens de bijeenkomst komen actuele onderwerpen aan de orde…
EMO Hannover

Innogrind present at the EMO Hannover

Exhibitors travel to EMO Hannover from all over the world and from all sectors of metalworking technology. With a share of foreign exhibitors running at approximately 60%, EMO Hannover is the world's most international metalworking trade fair.…

Persconferentie 7 mei - Amsterdam

EMO Hannover brengt in september 2019 het volledige spectrum van metaalbewerkingstechniek naar Hannover. Op dinsdag 7 mei organiseert Hannover Consultancy B.V. een persconferentie voor Nederlandse vakjournalisten in The Dylan Amsterdam. Jos van Langh van Innogrind zal gastspreker zijn!

Innogrind brochure

The Innogrind brochure explains why to detect thermal damage in an early stage | how to solve grinding burn | why to train your people on grinding burn prevention

INNOZL™ introduction in South Korea 2019

South Korea has a wide variety of industries, among that tool grinding, automotive, gear, aerospace and bearing industry. Innogrind visited several companies together with partner Stomax Global.

New year - New office

As the year ends, we find ourselves reflecting on the past year and those who have helped to grow our business. We start the new year in a new office that fits our growth. We have found a new space close to the automotive campus in Helmond.

Innogrind is moving

Due to the growth of our company Innogrind moves to a new office in Helmond. The office location hosts many technical and commercial orientated SMEs’ and gives us the full professional support which we need. Our internal sales and administration team will give the full support you can expect.
Logo Innogrind

Innogrind Rebranding

Welcome to the completely new Innogrind website. In the last months we have updated our branding to the next level. After getting feedback from our customers we took the time to investigate where we missed the sweet spot. Since we take customer feedback very seriously, we decided it was time for the next step.